5 things to know before ordering injection-molded medical parts
Plastic parts for medical devices need more precision and cleanliness than everyday molded parts. If you send the following from the start, a molder can assess your project and quote faster and more accurately.
1. Drawings and tolerances
Send a 3D file (such as STEP or IGES) together with a 2D drawing that shows key dimensions and tolerances. If you have no drawings yet, a sample part is a good starting point. Mark which dimensions matter for assembly or use.
2. Medical-grade resin
Name the resin type and grade you need. Parts that touch the body or specimens usually need materials with biocompatibility test data, for example under ISO 10993 or USP Class VI, depending on how the part is used. Ask the resin supplier for the supporting documents.
3. Cleanroom class
Parts that touch patients or specimens should be molded in a cleanroom to keep dust and contaminants down. State the class you need, such as Class 1000 or Class 10000.
4. Sterilization
The sterilization method affects the choice of material. Gamma irradiation can make some plastics brittle or discolored, and some plastics cannot take the heat of steam sterilization. Tell your molder early whether parts will be sterilized with ethylene oxide (EO), gamma or steam.
5. Volumes and packing
Give the order quantity, estimated annual volume, packing format and any lot labeling you need. These affect the mold design and the price per part.
Once you have these ready, send your quote request by email or phone.